Canceling The Process Currently Being Performed (Soft Reset) - Canon Color image RUNNER LBP5360 User Manual

IMPORTANT
You cannot operate the printer while <03 CANCELING JOB> is displayed.
Canceling the Process Currently Being Performed (Soft
Reset)
If you want to cancel the process currently being performed, perform SOFT RESET
using the following procedure. A soft reset deletes the print data received by all the
interfaces, the job being processed, and the print data in the printer memory.
IMPORTANT
3
Be sure to operate the printer from the computer to cancel printing before canceling the
•
job from the printer (Soft Reset).
When a soft reset is performed, the data being printed and the data being received by all
•
the interfaces is deleted. Therefore, perform printing from the computer again as needed.
The data that has been already sent to the memory are all deleted even if it is the data of
•
other interface. If you are using the printer on a network, be careful so that this operation
does not affect the data from other computers when performing this procedure.
NOTE
Hard resets delete all the registered files such as the form data saved in the RAM of the
printer, but soft resets do not delete them.
1
2
3-16 Canceling a Job
Press [Reset].
RESET
→
SOFT RESET
→
The RESET menu is displayed.
Select SOFT RESET using [
Holding down the [OK] key 3 seconds or more is the operation for HARD RESET.
SOFT RESET
03 SOFT RESET
When <03 SOFT RESET> disappears, the soft reset is completed.
] and [ ], then press [OK].
→