governor settings
automatically when changing
conditions. Consider setting the
battery Fail Safe settings and
other helpful functions on the
governor itself.
5.3.10 Throttle Mixing (THROTTLE MIX):
This function can be set for each flight condition, and is used to correct the tendency of the model to change
altitude when the rotor is tilted by aileron, elevator, and rudder controls.
ADJUSTABILITY:
• Mixing may be set from 0 to 100% each flight condition.
Goals
Correct the tendency
of the model to
change altitude.
5.3.11 SWASH-RING
This function is to limit movement of swash plate to avoid damage to the SWASH ROB during operation
aileron and ELEVATOR. It is affected in 3D flight. Movement of AILERON and ELEV is limited in the
circle.
ADJUSTABILITY:
Activate the function.
Opt ion al : chang e cut- of f
channe lto channel 8 and
assign switch and direction
for on/off (channel 8).
Optional: Changes switch
assignment to select governor
settings.
Ex : se l e c t sw i t c h th a t
se l e ct s th econditions.
Adjust governor speed
settings perswitch position
or condition as needed.
(Ex: defaults are fine.)
Allows head speed
adjustment from transmitter.
Close
Steps
Open THRO- MIX function.
Activate the function.
Adjust the rate.
Ex: IDL1 (AIL to TH) 10%
Repeat as needed.
Close
to MIX
to -cut- CH:
to -cut-SW
to SW
to each Cond position
needed.
to next Cond,repeat .
Inputs
to BASIC menu,
to THRO-MIX
to MIX
,
to IDL1 (AIL→TH)
74
to ACT.
,
to+CH8,
,
,
to desired SW
to Cond,
,
or
again to ADVANCE
to ON
,
to 10%,
as