Printhead Replacement - AGFA Ovation! Operator's Manual

3.3

Printhead Replacement

Removal:
1. Turn off the printer.
2. Unlatch the printhead
carrier assembly,
Loosen the printhead
screw until it is free
from the printhead.
Carefully remove the
printhead from the
printhead carrier
assembly.
3. Remove the printhead
cables from the back
of the printhead.
Figure 3-4 Disconnecting the Printhead Cable
Replacement:
1. Connect the printhead cables to the new printhead.
2. Position the printhead on the printhead carrier assembly and
tighten the printhead screw.
3. Ensure that the printhead cable is not pinched and that the
Printhead is clean.
Ovation!™
Maintenance
31