Switches And Indicators - AGFA Ovation! Operator's Manual

1.12 Switches and Indicators

Descriptions and locations of the Printer's switches and indicators are
shown below.
Figure 1-14 Switches and Indicator Locations
Switch/Indicator
ON/OFF switch
FEED Button
Printer in
ready state -
(LED ON)
Press twice
Press once
Printer in
alarm state -
(LED fast flash)
Press once
Darkness Control
Power LED
Solid ON
Slow Flash
Fast Flash
14
Getting Started
Controls power to the Printer.
Printer feeds media to first print position of next label.
Pauses Printer, press again to resume.
Clears alarm, feeds one label.
Used to balance a new Printhead so that it prints at the
same level of darkness as the previous head.
Indicates power is supplied and the Printer is ON.
Indicates the Printer is in a 'PAUSED' condition.
Indicates the Printer is in an 'ERROR' condition such as
Media Out, Ribbon Out (if equipped), or Jam.
Function
Ovation!™