Table of Contents
Advertisement
3.7.7 Network setup
Enter the "Network" screen from "Main Menu" →"Advanced", as shown below:
TYPE: with 3 options: static configuration, DHCP and PPPOE
Static : allocating an IP address manually
DHCP: acquiring an IP address automatically
After selecting the DHCP mode, restart the system after confirmation. After starting, the system will establish a connection with the
DHCP server automatically. When this is successful, this unit will be allocated an IP address, which will be displayed on the
screen.
PPPOE: broadband dial-up network access, as shown below:
PPPOE user name and password: Fill in the PPPOE user name and password provided by the Internet service provider.
When one ADSL line is connected to one DVR only, you can select Internet connection in the PPPOE mode, when the ADSL
modem will connect the DVR directly. Then press "Enter" to select PPPOE in the connection mode to enter the PPPOE Setup
screen. After entering the broadband user name and password, click "Enter" and the system will restart. After that, the DVR will
establish a network connection in the PPPOE mode automatically. After successful connection, the IP on the IP address will be
modified to the acquired dynamic WAN IP address automatically.
Media port: the port number used in the private protocol communication between the DVR and the PC end, usually being 9000 by
default. If this port of the PC is occupied by any other service, please modify it to an unused port.
WEB port: the http port, usually being 80 by default. If the administrator modifies the WEB port to any other port, such as 88, you
have to postfix the IP with the port number, and enter "http://192.168.1.19:88" in the address bar when accessing the DVR via the
IE.
IP address: allocating an IP address depending on the network environment of the DVR
Subnet mask: filling in a subnet mask in depending on the network environment of the DVR
Gateway: Setting the gateway depending on the network environment of the DVR. If there is no router device in the network,
please allocate an IP address on the same network segment. If there is a router device in the network, you have to set the
corresponding gateway.
20
Advertisement
Table of Contents
