Table of Contents
Advertisement
Step 1 Select the PTZ channel
Step 2 Setup the pause time (s)
Step 3 Adjust the arrow keys to the position which need to be monitored
Step 4 Press SETTING POINT .Repeat steps 2-4 to set the second location
Step 5 Select the APPLY button to save the settings
----END
Note:
1, if you need to set up more points, repeat steps 2-5
2, to view the point has been set, in the current point enter the number, select SLIP.
3, to delete the point has been set, enter the number, select delete.
2.4.8 Manual recording/stop recording
If "timing record" is on (please see Chapter 3), and recording is not set in this period, "manual recording" and "timing record" is
effective. When boot-record mode is on, this function is not available.
2.4.9 ZOOM
In the single-channel full-screen mode, can be done by dragging the mouse to marquee area to enlarge
2.4.10 PIP
In the single-channel full-screen mode, you can see floating images of other channels.
9
Advertisement
Table of Contents
