Table of Contents
Advertisement
SSL: a secure link transmission protocol, whose "Off" or "On" state is determined by the mailbox server. "Off" is usually chosen,
but for GMAIL the SSL "on" is needed.
SMTP PORT: the mailing port of the mailbox server, usually being 25, with the exception of a few mailboxes, such as the mailing
port of the GMAIL server whose port number is 465.
SMTP: the server address of the mailbox used, for example, the SMTP server of the Yahoo mailbox is smtp.mail.yahoo.com.cn;
please check this address to your mailbox supplier.
SEND EMAIL: the mailbox address used to send mails, the
above-mentioned SMTP server is also the server of the corresponding sender address.
SEND PW: the password of the mailbox used to send mails.
RECV EMAIL: the address used to receive the picture transmitted after the DVR motion detection alarm. If the alarm frequency of
the system is high, the number of pictures sent will also be larger. Please pay attention to the space of your mailbox timely lest the
normal operation of the mailbox be affected due to an excess number of pictures.
3.7.2 System info
Enter the System Info screen from "Main Menu"→"Advanced Functions", as shown below:
You can inquire about the software version number, whole unit version number, MAC address and serial number in this screen.
3.7.3 Motion detection
Enter the Motion Detection screen from "Main Menu" →"Advanced ", as shown below:
MD Channel and STATUS: Each channel has a corresponding switch. Press "Enter" to select motion detection "On" or "Off".
17
Advertisement
Table of Contents
