Table of Contents
Advertisement
Quick Links
DVR
- H.264 Video Compression Technology
- Multiplex Operation
- Long Recording Duration
- Intelligent Video Motion Detection Recording
- Remote Network Surveillance & Backup Functions
- Easy to operate with remote or USB mouse
- System Auto recovery after power loss (blackout)
www.watchguardalarms.com.au
FOR MODELS: DVR4EONPACK & DVR8EONPACK
Professional Surveillance Pack
Digital Video Recorder with Security Cameras
- 420 TVL Resolution
'Manual"
N517
15m IR Day/Night Cameras
- High Quality Image sensor
- 26 x IR LEDs
i
Advertisement
Table of Contents
Related Manuals for Watchguard DVR4EONPACK
Summary of Contents for Watchguard DVR4EONPACK
- Page 1 FOR MODELS: DVR4EONPACK & DVR8EONPACK Professional Surveillance Pack Digital Video Recorder with Security Cameras ‘Manual” N517 15m IR Day/Night Cameras - H.264 Video Compression Technology - High Quality Image sensor - Multiplex Operation - 26 x IR LEDs - Long Recording Duration...
-
Page 2: Table Of Contents
Attention Chapter 1 Overview ........................2 1.1 Introduction ........................2 1.2 Packaging and accessories ..................... 2 1.3 Main features ........................2 1.4 Technical parameters ...................... 3 1.5 Product appearance and interface definition ..............4 1.6 Remote controller ......................5 1.7 Mouse ..........................6 Chapter 2 Quick installation ...................... -
Page 3: Attention
Attention The power supply of this DVR is provided through DC12V3A adapter, please check the power outlet before installation and ensure it can meet the requirements of adaptor; Do not place the DVR at a place subject to rain or moisture; ... -
Page 4: Chapter 1 Overview
Chapter 1 Overview 1.1 Introduction This product is a consumer-oriented 4/8-channels D1/CIF real-time network DVR, and adopt the industry's most advanced SOC technology and standard H.264 encoding method, so that the image quality is higher, network transmission effect is better and system is more stable; the body is made under stylish appearance design and sophisticated manufacturing process, the 1U standard chassis is suitable for small-scale monitoring places such as shop, supermarket, residential, school, hotel, Internet cafe, family and other civilian sites where require more on video quality, network transmission and real-time playback. -
Page 5: Technical Parameters
1.4 Technical parameters Features Description Operating system Embedded LINUX Video compression H.264 Video input 4/8 channels BNC Video output 1 channel BNC Audio input/output 4 or 8-ch /1-chRCA (note: optional ) Display 1/4/8-channel Multiplex operation Live, recording, network, ,mobile phone surveillance simultaneously Recording mode Timer/manual/motion detection/alarm Recording frame rate... -
Page 6: Product Appearance And Interface Definition
1.5 Product appearance and interface definition 1.5.1 Front panel Notice: There are no keys in the front panel, only use the mouse and remote 1.5.2 Back panel 4 CH Interface description Physical interface Video input BNC connector Connect analog video(camera) signal input Video output CVBS output and connect the monitor VGA output... -
Page 7: Remote Controller
1.1 1.6 Remote controller For reference only, the real product shall prevail. Functional definition Spare keys Spare keys Channel selection; number keys PTZ Control Single and multi-split screen Quit shortcut menu Shortcut menu Direction buttons Exit / Return MENU Enter the main menu STARTREC Start recording STOPREC... -
Page 8: Mouse
1.7 Mouse This equipment supports USB1.1 mouse, so the user can operate with mouse (mouse operation is as same as WINDOWS operating setting) to realize menu functions. It is just ok to insert the mouse with USB interface to the mouse interface in this Mouse action Function Right button... -
Page 9: Chapter 2 Quick Installation
Chapter 2 Quick installation 2.1 HDD Installation Harddisk installation must be carried out by technicians to avoid damage to the equipment and harddisk. The DVR mainframe must be powered off before operation. This equipment supports harddisk with SATA harddisk interface. Seagate brand harddisk is recommended. -
Page 10: Shortcut Menu
2.4 Shortcut menu Click right button in the interface after system startup, quick operations are available to DVR system in the pop-up menu, it can set or control parameters including main menu, lock, video search, PTZ control and video recording. 2.4.1 Main menu Click "Main Menu"... - Page 11 Step 1 Select the PTZ channel Step 2 Setup the pause time (s) Step 3 Adjust the arrow keys to the position which need to be monitored Step 4 Press SETTING POINT .Repeat steps 2-4 to set the second location Step 5 Select the APPLY button to save the settings ----END Note:...
-
Page 12: Chapter 3 Advanced Settings
Chapter 3 Advanced settings 3.1 Main menu The main menu has the “PLAYBACK”, “RECORD”, “HDD”, “BASIC”, “ADVANCED” and “Exit” options, as shown below: Note: The setup of all the submenus below will not be effective until “Enter” is pressed. The setup of this menu will be invalid if you exit directly. -
Page 13: Video Search
Time configuration: First select from the 3 modes of alarm recording, general recording and no recording for your desired recording mode for a certain lattice, and configure specific recording time lattices (each lattice represents 1hr). Each lattice can be configured into different recording modes by marking them into different colors, such as red, green and background color, which represent alarm recording, general recording or no recording within each hour respectively. -
Page 14: Backup
Notes: ① In the “Detailed File” list, by which recording channel is the current record file recorded is displayed at “Channel”, the starting and ending times of record packaging at “Record Time”, the size (unit: MB) of this record file at “Size”, and the type of this record file at “Type”, with the two options of normal and alarm. -
Page 15: Harddisk Management
3.5 Hard disk management Enter the Hard disk Management screen from “Main Menu” →“HDD”, as shown below: STATUS: After the hard disk is connected, the system will detect if the hard disk is correct automatically. If the hard disk needs formatting, “Unformatted”... - Page 16 The system has optional multiplex languages, after choosing the language, click "Apply" button to save, and it will go into effect after system restart. 3.6.2 Time setup Move the cursor to the “DATE/TIME” option (the icon is surrounded by a yellow frame to indicate selection), and press “Enter” to enter the setup screen of this option, as shown below: The system time, date format, time format, time zone and summer time can be set up in this screen.
- Page 17 Name: Move the cursor to the input box of this option, and press “Enter” to enter the input screen of this option. Numerical, English and Chinese pinyin input methods are supported; Position: Move the cursor to this option, and press “Enter” to change over between name positions; there are 5 setup options: top left, bottom left, top right, bottom right and off;...
-
Page 18: Advanced
Note: The system will restart when the VGA resolution or the camera resolution is modified. 3.7 Advanced Enter the following screen from “Main Menu” →“Advanced”: The advanced functions include the 7 options of alarm setup, system information, motion detection, mobile phone monitoring, system maintenance, PTZ Setup and Network Setup. - Page 19 SSL: a secure link transmission protocol, whose “Off” or “On” state is determined by the mailbox server. “Off” is usually chosen, but for GMAIL the SSL “on” is needed. SMTP PORT: the mailing port of the mailbox server, usually being 25, with the exception of a few mailboxes, such as the mailing port of the GMAIL server whose port number is 465.
- Page 20 SENSITIVITY: Each channel has a corresponding sensitivity setting, with the 4 levels of 1, 2, 3 and 4, in which 4 is the highest. Press “Enter” for changeover. MD AREA: Each channel has a corresponding motion detection area setting. Move the cursor to “Setup” of the corresponding channel, and press “Enter”...
- Page 21 For more detailed mobile phone installation and user manual, please refer to the Mobile Phone User Manual in the CD 3.7.5 System maintenance Enter the “System Maintenance” screen from “Main Menu” →“Advanced Functions”, as shown below: AUTO RESET: When this option is set to “On”, the user can set the restart frequency and time of this device himself/herself. System update: Copy the update file to the root directory of the U-disk, then insert the U-disk into the USB slot of this unit, and “Enter”...
- Page 22 3.7.7 Network setup Enter the “Network” screen from “Main Menu” →“Advanced”, as shown below: TYPE: with 3 options: static configuration, DHCP and PPPOE Static : allocating an IP address manually DHCP: acquiring an IP address automatically After selecting the DHCP mode, restart the system after confirmation. After starting, the system will establish a connection with the DHCP server automatically.
-
Page 23: Domain Name Application
DNS: setting the IP address of the domain name server (DNS varies from city to city); you can refer to the domain name server configurations of the PC. UPNP: When the UPNP function is on(UPNP function on the router end is also on of the router setting), then the DVR will reflect the port and IP into the router automatically. -
Page 24: Chapter 4 Dvr Network
Chapter 4 DVR network 4.1 Functional characteristics In network operations, software installation is realized by the IE browser of the operating system itself, which is simple and convenient. The DVR supports LAN and WAN access, as well as IP and domain name access. 4.2 Installation and download of controls Automatic installation of plug-ins unit: First add the IP address of the DVR as a reliable site of the system. -
Page 25: Ie Log-In
4.3 IE log-in Log in the system after the plug-in unit has been installed. For example, if the domain name of the DVR dvrtest05.eicp.net and its port is 80, enter the domain name in the IE address bar, as shown below, enter the user name and the password, select “LAN” or “INTERNET”... -
Page 26: Recording Mode
First select the date of the record to be played and the channel and record types, and then click “Search”. The eligible record files will appear in the file list, with the bold numbers denoting dates with record data, as shown in the figure above. Select the file to be played back, and double-click this file or click “Playback”... -
Page 27: Ptz Control
4.8 PTZ control Click “Setup” →“PTZ ” to enter the PTZ Control mode. See Figure 5-6: See Chapter 3 “Network Setup” in this manual for the setup method. 4.9 Network setup Click “Setup” →“Network Setup” to enter the Network Setup mode, as shown below: See Chapter 3 “Network Setup”... -
Page 28: Host Info
4.11 Host info Click “DVR HOST” to enter the Host Info screen, as shown below. View the operating state of the harddisk, the time remaining and the software version and MAC address of this system. -
Page 29: Chapter 5 Client Software & Player
Chapter 5 Client software & Player 5.1 Client software Open the Client software file " ,operate one of these two files and install it according to the remarks. Operate the program icon on the desktop after the installation. Then a Login interface come out as below: IP ADDRESS：Enter IP address or Domain Name MEDIA PORT：Enter the port number,the default is 9000 PASSWORD：Enter IE password... - Page 30 There will be .264 files in the file list,select one of the files to be played.Click 'OPEN' as shown in the following image: Then click 'PLAY' option as shown in the following image: After clicking 'PLAY' option,click the button of the player button, to enter the following interface as shown in the following image: ①...
- Page 31 Icon Icon ① Recording Schedule All video Play Forward, Play backword Increase video Pause, STOP Start Operation Backward /forward frame File Cut << >> Slow/Normal/Fast File Deletion Next Hour AVI Format transmission Capture bitmap Decrease video Volume Control Note:1.Double click the image to enlarge the image 2.When converting the AVI format, you should click ST button.Then click AVI to select the time periods Audio Setup:...
-
Page 32: Appendix 1. Q&A
Appendix 1. Q&A How to recover password if forgotten? A: Please contact technicians from vender or manufacturer if you have forgotten the password. Please set a safe password easy to remember (don’t set simple password like 123456 if you need more safety). No video output signal? A: Please confirm that the video output port is connected to the VIDEO OUT, and ensure BNC in DVR interface is in good connection, whether BNC cable is used for too long time and is aging, and ensure N system/P system selection is right. -
Page 33: Appendix 2 Harddisk Space Occupation Calculation
A: Check the motion detection time and motion detection zone and make sure that they are right setup, and check the sensitivity setting. 14. Alarm does not work? A: Check the correctness of alarm setting and alarm connection, and make sure that alarm signal input is correct. 15.