Table of Contents
Advertisement
2.4 Shortcut menu
Click right button in the interface after system startup, quick operations are available to DVR system in the pop-up menu, it can set
or control parameters including main menu, lock, video search, PTZ control and video recording.
2.4.1 Main menu
Click "Main Menu" to enter the main menu interface, please see 3.1.
2.4.2 Lock
When the password function is on (please see 2.3), click right button in monitoring interface, and select "Lock" in the pop-up menu,
the system interface can be locked immediately, password is required to log in if operation to mainframe menu is needed.
2.4.3 Channel switching
8-channel DVR can choose eight-channel, front four-channel and back four-channel. 4-channel DVR can choose to switch 4-
channel and one-channel.
2.4.4 Video search
Please see Chapter 3.
2.4.5 Start Sequence
Start video channel automatic switching function. (Right-click to exit)
2.4.6 Start Cruise
PTZ preset start cruising capabilities. (right click again to opt out cruise)
Note: This feature can only be valid after set up PTZ control parameters and preset points.
2.4.7 PTZ Control
Click right button in main interface and select "PTZ control", following interface will pop-up:
PTZ speed (fast or slow) can be controlled in this interface, zoom, focus and aperture is also controllable.
Cruise settting:
8
Advertisement
Table of Contents
