Sony SRW-5800 Operation Manual page 46

Move the cursor (B) to the [C] (CURRENT SETUP)
position.
To store all VTR memory banks
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
5
Move the cursor (B) to the "Memory Stick" side using
the cursor T button, and use the cursor R or r button
to move the cursor to the bank number ("Memory
Stick" side) where the data is to be saved.
Destination
(flashing)
The flashing cursor bar indicates the storage
destination.
6
To change the title of the bank, press the [F6] (EDIT
TITLE) button.
For details, see "4-1-6 Adding Titles to the Data" on
page 49.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
Storage begins.
After the storage is complete, the title of the VTR
memory bank appears on the "Memory Stick" side.
Preventing accidental erasure after saving settings
46
4-1 Registering and Storing Menu Settings
Press ALT/[F2] (PROTECT) buttons and a symbol
will appear to the right of the memory card bank
number.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Storing cue point lists to a "Memory Stick"
You can store up to 8 pages of cue point lists to a "Memory
Stick" along with titles.
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F4] (SHOW CUESET) button.
The display for storing cue point lists appears.