Sony SRW-5800 Operation Manual page 47

4
Press the [F8] (DIRECTION) button to select the <
direction.
The left cursor bar flashes.
5
Use the cursor T button to move the cursor (B) to
CUE POINT SET side, then press the cursor R or r
button to move the cursor bar to the number of the
memory bank in the "Memory Stick" where you want
to store the cue point list.
Destination
(flashing)
6
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
7
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR stores the cue point list to the "Memory
Stick".
8
Press the [F6] (EDIT TITLE) button to add a title to the
cue point list.
For details, see "4-1-6 Adding Titles to the Data" on
page 49.
Preventing accidental erasure after saving settings
Move the cursor (B) to the cue point set number you
wish to save and press ALT/[F2] (PROTECT) buttons.
A symbol will appear to the right of the cue point set
number.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Recalling the contents of a "Memory
Stick"
The contents stored in a "Memory Stick" can be recalled to
the current VTR memory bank.
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F8] (DIRECTION) button to select the ,
direction.
The right cursor bar flashes.
4
Move the cursor (B) to the "Memory Stick" side using
the cursor T button and use the cursor R or r buttons
to place the cursor bar by the memory bank where the
settings were saved.
Saved data
5
To change the title of the memory bank, press the [F6]
(EDIT TITLE) button.
4-1 Registering and Storing Menu Settings
47