Sony SRW-5800 Operation Manual page 173

Item number Item
A03 FC
SUPERIMPOSED
CHARACTER
A04 PD DF/NDF
SELECT
A05 PD EXT SD REF
LOCK MODE
A06 PD
SUPERIMPOSED
TIME CODE ID
A07 PD CHARACTER
24F TIME CODE
MODE
Setting Function
[off] Specifies whether or not to superimpose time data and
on operating status information on the signal output from the
FORMAT CONV. OUT connector.
off: No information is superimposed.
on: Information is superimposed.
[drop frame]
Selects the running mode for the pulldown time code to be
non-drop frame preset.
auto drop frame: Drop frame mode
non-drop frame: Non-drop frame mode
auto: The unit switches the running mode (DF/NDF)
[off] When the operating frequency is set to 23.98PsF, specifies
lock1 whether or not the pulldown output signal and down-
lock2 converted output signal are synchronized with the
reference signal by the REF. INPUT 2 connector.
off: The pulldown output signal and down-converted output
lock1: The pulldown output signal and down-converted
lock2: The pulldown output signal and down-converted
Notes
• A warning message appears when the HD reference
• "lock1" and "lock2" are effective only when the operation
• When editing in 23.98/24PsF mode, with this unit as the
[off] When item 620 and A03 is set to "on", specifies whether or
on not the ID (24F/30F) is displayed to the right of
superimposed time code.
off: No ID is displayed.
on: ID ("24F" or "30F") is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
[off] When item 620 and A03 is set to "on", specifies whether or
on not the 2 : 3 pulldown 24-frame time data is inserted to the
first line instead of 30-frame time data.
off: 30-frame time data is displayed.
on: 24-frame time data is displayed.
Note
The setting of this item is effective only when the operation
mode of this unit is set to 23.98PsF or 24PsF.
automatically according to the frame frequency of the
unit. When the frame frequency is 23.98 Hz, the unit
switches to the drop frame mode and switches to the
non-drop frame mode when it is 24 Hz.
signal are not synchronized with the reference signal
by the REF. INPUT. 2 connector.
output signal are synchronized with the reference
signal by the REF. INPUT 2 connector.
output signal are synchronized with the reference
signal by the REF. INPUT 2 connector. When the PB/E-
E mode is selected, the amount of delay on the A
frame of the pulldown output signal for the A frame of
the main video signal is fixed to 2 frames (59.94i).
signal and REF. INPUT 2 reference signal are not input or
not synchronized.
mode of this unit is set to 23.98/24PsF.
recorder and with "lock2" selected, phase
synchronization may not be achieved within 5 seconds.
Also, edit In points may be out of alignment. In these
cases, select "off".
173
Menu List