Sony SRW-5800 Operation Manual page 48

The title can also be changed after the settings are
recalled.
For details, see "4-1-6 Adding Titles to the Data" on
page 49.
6
Press the cursor t button to move the cursor (B) to
the VTR side, then press the cursor R or r button to
move the cursor to the VTR memory bank number
where the recalled data are to be stored.
To change the current VTR menu settings
Move the cursor (B) to [C] (CURRENT SETUP).
To replace all VTR memory bank contents with
"Memory Stick" data
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR recalls the contents of the "Memory Stick".
After the recalling process is complete, the title of the
memory bank of the "Memory Stick" appears under
the VTR indication.
9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Recalling a cue point list from a "Memory
Stick"
Recalling a cue point list from a "Memory Stick" replaces
the current VTR cue point list with the recalled data.
48
4-1 Registering and Storing Menu Settings
Destination
1
(flashing)
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F4] (SHOW CUESET) button.
The menu for storing cue point lists appears.
4
Press the [F8] (DIRECTION) button to select the ,
direction.
The right cursor bar flashes.
5
Use the cursor T button to move the cursor (B) to the
CUE POINT SET side, then press the cursor R or r
button to move the cursor bar to the number of the
memory bank in the "Memory Stick".