Sony SRW-5800 Operation Manual page 156

Item number Item
624 CHARACTER TYPE without BG
625 CHARACTER SIZE
626 DISPLAY
INFORMATION
select
627 CHAR WARNING
DISPLAY at dual
line mode
628 REMAIN TIME
DISPLAY
629 CONDITION
DISPLAY VIDEO
MONITOR
156
Menu List
Setting Function
Sets the style of text information such as time codes output
outlined from the MONITOR connector of SD SDI OUT, the SD OUT
translucent COMPOSITE connector and MONITOR connector of HD
[with BG]
SDI OUTPUT.
without BG: White characters, with no background.
outlined: White characters outlined in black.
translucent: White characters on a gray screen
with BG: White characters on a black background.
Note
For the SD OUT COMPOSITE (MONITOR) connector, the
"translucent" setting is automatically changed to "with BG".
× 1
Sets the size of text information such as time codes output
from the MONITOR connector of SD SDI OUT, the SD OUT
COMPOSITE connector and MONITOR connector of HD
SDI OUTPUT.
× 1: Normal size.
× 2: Twice normal size.
time data & status When item 620 is set to "on", this setting specifies the
time data & UB content of text information output from the MONITOR
time data & CTL connector of SD SDI OUT, the SD OUT COMPOSITE
time data & VITC connector and FORMAT CONV. OUT (OPTION) connector.
[time data only] time data & status: Timer counter display and status
time data & UB: Timer counter display and user bits.
time data & CTL: Timer counter display and CTL.
time data & VITC: Timer counter display and VITC.
time data only: Timer counter display only.
[off]
When item 626 is set to anything other than "time data
on only", this item specifies whether warning messages flash
on the second line or not.
off: Warning messages do not flash.
on: If a warning message exists, it flashes.
Notes
• Messages that have been cleared are not displayed.
• When there are multiple warning messages, each
[off]
Sets whether to display remaining time on the tape in
10min superimposed character position.
on off: Do not display remaining time.
10min: Display remaining time when it is 10 minutes or
on: Always display remaining time.
Note
The remaining time on the tape is not displayed when no
cassette is inserted. The remaining time is not also
displayed until the VTR finishes detecting the diameter of
the wound tape and estimating the remaining time
immediately after the cassette is inserted.
enable Sets whether or not to display playback signal status in
[disable]
superimposed character position.
enable: Displays playback signal status.
disable: Does not display playback signal status.
background.
information.
For more information about clearing warning messages,
see "Clearing warning messages" on page 136.
message flashes twice before it is replaced by the next
message.
less.