Sony SRW-5800 Operation Manual page 45

Formatting a "Memory Stick"
"Memory Sticks" must be formatted before you can use
them.
1
Insert the "Memory Stick".
2
Press the SET UP button.
The SET UP menu appears in the display.
3
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
4
Press the [F1] (FORMAT CARD) button.
A message asking you to confirm the operation
appears in the display.
To cancel formatting
Press the CLR button while the confirmation message
appears in the display.
5
Press the [F1] (FORMAT CARD) button while
holding down the SFT button.
The VTR starts formatting the "Memory Stick".
Storing the contents of the VTR memory
banks to a "Memory Stick"
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
3
Press the [F8] (DIRECTION) button to select the <
direction.
The left cursor bar flashes.
4
Move the cursor B to the VTR side using the cursor t
button and use the cursor R or r button to move the
cursor bar to the memory bank where the data is to be
saved.
To store the current VTR menu settings
4-1 Registering and Storing Menu Settings
Saved data
45