Using The Scan Station - Kodak Scan Station 700 series User Setup Manual

Using the Scan
Station
24
1. Place the documents you want to scan in the input tray.
NOTES:
• Depending on how your Scan Station is configured, you may be
required to enter your user name, password and domain to login.
• The message, Please wait, lamps are warming up may be
displayed. Document feeding proceeds after the lamps warm up.
2. Depending on how your Scan Station is configured, do the following:
• If your Scan Station is configured for Jobs only, touch the job
you want to scan.
• If your Scan Station is configured for Jobs with ability to
change settings, touch the Settings button and make any
desired changes to the Scan settings and/or select the desired
Destination, then go to Step 3.
3. Touch the Scan icon
NOTE: Depending on how your Scan Station is configured, the
message, Do you have more pages to scan? may be
displayed. This allows you to continually add pages to your scan
session until you select No on the message or the 30-second
timeout period has been reached.
.
A-61808 September 2014