Kodak Scan Station 700 series User Setup Manual page 5

4
Icon description
Goes to the previous screen.
Goes to the next screen.
Logs you off of the Scan Station.
Displays Scan Station information (e.g., version number).
When the Power icon is blue, click it to turn the Scan Station
off.
Considered busy when you are logged in (the Administrator
has enabled Force User Login). To turn off, select the 'X' icon,
then select the Power icon on the Login screen.
The User Reference Guide for the Kodak Scan Station 700 Series
provides detailed information about scanning jobs.
2. No jobs, configure your own settings: The touchscreen will
display default jobs and may display some jobs that have been
configured by your administrator, as well as settings and
destinations which allow you to configure your own job. See the
sections entitled, "Destination screen" and "Settings screen" for
more information.
NOTES:
• If you change these settings, they will be enabled only for the
current scan session.
• If there are no destinations defined, a blank touchscreen may be
displayed. See your administrator for more information.
A-61808 September 2014