Kodak Scan Station 700 series User Setup Manual page 21

20
Use the scroll arrow to display additional Advanced settings:
- Streak Filter: allows you to configure the Scan Station to filter
vertical streaks from your images. Streaks are lines which may
appear on an image and are not part of the original document.
Streaks may be caused by contaminants on your documents
(e.g., dirt, dust or frayed edges) or by not following the
recommended cleaning procedures for your Scan Station. Click
Streak Filter to turn this option on where you can select an
Aggressiveness value which allows you to adjust the extent at
which the streaks are filtered. The values range from -2 to 2.
- Combine Front and Back Images — typically, for a document,
one image is created for the front side and another image is
created for the back side. Turn this option on if you want one
image that contains both the front side and back side of the
document. The selections are:
• None
• Front on Top: front side will be above the back side within the
image.
• Front on Bottom: back side will be above the front side within
the image.
• Front on Left: front side will be to the left of the back side
within the image.
• Front on Right: back side will be to the left of the front side
within the image.
A-61808 September 2014