Kodak Scan Station 700 series User Setup Manual page 20

A-61808 September 2014
- Enable Auto-Orient: if enabled, the Scan Station will analyze
each document to determine how it was fed and will rotate the
image to the proper orientation.
- Hole Fill: allows you to fill in the holes that are around the edges
of your document. The types of holes that are filled include:
round, rectangular, and irregularly shaped (e.g., double-punched
or those having a slight tear that could have occurred when the
document was removed from a binder).
- Blank Image Detection: used to detect blank pages (e.g., the
back side of a document), so these pages can be discarded. The
default is 1%. Document images that fall below the percentage
will be discarded.
- Image Edge Fill: fills the edges of the final electronic image by
covering the area with the selected color.
• None
• Automatic - the scanner will automatically fill the edges of the
image using the surrounding color.
• Automatic - include tears - in addition to filling the edges,
the Scan Station will also fill in tears along the edge of
document.
• White
• Black
NOTE: If you select White or Black, the Top, Bottom, Right
and Left options will be available on the Image Edge Fill
screen. When you select Top, Bottom, Right and/or Left,
a screen will be displayed allowing you to enter a value in
these fields to determine how much of the edge will be
filled in. When using Image Edge Fill, be careful not to
enter a value too large as it could fill in image data that
you want to keep.
19