Color Temperature - Sony PDW-700 Operation Manual

a Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 0.0 K to 99.9 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the OFFSET WHITE setting (see
page 151).
No display: OFFSET WHITE is OFF
+: The value of OFFSET WHITE is greater than
3200K.
–: The value of OFFSET WHITE is less than
3200K.
b Video format
Indicates the format of video being currently
played back or recorded (see page 50)
c Extender
Displayed as follows depending on the state of the
optical extender and digital extender.
Indication Optical extender Digital extender
EX ON
Ex2D ON
x2D OFF
d Zoom position
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
e Clip number/number of clips
During playback or search, indicates the total
number of clips and the number of the selected
clip.
During clip list playback, indicates the clip list
name, the total number of sub clips, and the
number of the selected sub clip.
f Wireless microphone reception level
When a UHF portable tuner is installed in the
camcorder, "W" appears together with four-
segment reception level indicators for each of the
tuner channels (1 or 2 channels).
Normal use: The number of white segments
indicates the strength of the signal level.
Muted: The number of gray segments indicates
the strength of the signal level.
Reception level over peak: "P" is displayed
instead of the indicators.
Tuner battery is low: The channel number and
indicator of the corresponding channel
1)
flash.
1) DWR-S01D only
30 Locations and Functions of Parts and Controls
OFF
ON
ON
1)
g Power source voltage/battery
remaining capacity
When the unit is powered from a battery pack,
indicates the remaining capacity of the power
source voltage. When the unit is powered from a
battery connected to the DC IN connector or AC
adaptor attached to the battery attachment shoe,
indicates the power source voltage.
h External battery
Appears if the power is supplied from an AC
adaptor connected to the DC IN connector
when the DISP DC IN item is set to ON on the VF
DISP 2 page of the OPERATION menu (see page
141).
i Controlling external device
Appears when HDSDI REMOTE I/F in the CAM
CONFIG 1 page of the MAINTENANCE menu
is set to CHARA, and this unit is controlling
recoding by an external device connected to the
SDI OUT 1/2 connectors (HDSDI output).
1) SDI OUT 1 SELECT or SDI OUT 2 SELECT on the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
j Electric color temperature filter
Indicates the setting value of electric color
temperature filter.
k Filter
Indicates the currently selected filter type (see
page 15).
l White balance memory
Indicates the currently selected white balance
automatic adjustment memory.
A: Displayed when the WHITE BAL switch is set
to A.
B: Displayed when the WHITE BAL switch is set
to B.
P: Displayed when the WHITE BAL switch is set
to PRST or when the preset button on an RM-
B150 has been pushed.
T: Displayed when ATW is being used.
m Timecode
Indicates the elapsed recording/playback time,
timecode, user bits or other information selected
by the DISPLAY switch (see page 21).
1)