Sony PDW-700 Operation Manual page 113

No. Page Item
05 BLACK BLACK GAMMA
GAMMA
BLACK GAM
RANGE
MASTER BLK
GAMMA
R BLACK GAMMA
G BLACK GAMMA
B BLACK GAMMA
TEST OUT SELECT
06 KNEE KNEE
KNEE POINT
KNEE SLOPE
KNEE SATURATION OFF/ON
KNEE SAT LEVEL
WHITE CLIP
WHITE CLIP LEVEL 100.0% to 108.0% to
07 DETAIL 1 DETAIL
APERTURE
DETAIL LEVEL
APERTURE LEVEL
DTL H/V RATIO
CRISPENING
LEVEL DEPEND
LEVEL DEPEND LVL (–99 to +99)
DETAIL
FREQUENCY
Settings Description
OFF/ON Turns the black gamma correction
on or off.
LOW/L.MID/H.MID/ Sets the range affected by black
HIGH gamma.
(–99 to +99) Adjusts the master black gamma.
(–99 to +99) Sets the correction curve of the R
black gamma.
(–99 to +99) Sets the correction curve of the G
black gamma.
(–99 to +99) Sets the correction curve of the B
black gamma.
VBS/R/G/B/LCD Selects the output signal of TEST
OUT connector.
OFF/ON Turns the knee correction circuit
on or off.
50.0% to 85.0% to Sets the knee point level.
109.0%
(–99 to +99) Set the knee slope level.
Turns the knee saturation function
on or off.
(–99 to +99) Sets the knee saturation level.
OFF/ON Turns the white clipping function
on or off.
Adjusts the white clipping level.
109.5%
OFF/ON Sets the detail correction function
on or off.
OFF/ON Turns the aperture correction
function on or off.
(–99 to +99) Sets the general level of the detail
signal.
(–99 to +99) Sets the aperture correction level.
(–99 to +99) Sets the level of the V detail
signal.
(–99 to +99) Sets the crispening level.
OFF/ON Turns the level depend function
on or off.
Sets the level of the level depend.
(–99 to +99) Sets the frequency of the H detail
signal.
Menu List 113