Sony PDW-700 Operation Manual page 56

Note
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B150
Remote Control Unit is connected to the camcorder.
MENU knob
1
Set the MENU ON/OFF switch to ON
while holding down the MENU knob.
The TOP menu appears.
2
Turn the MENU knob to move b to
OPERATION.
3
Press the MENU knob.
If this is the first time the OPERATION
menu has been displayed, the CONTENTS
page of the OPERATION menu appears. If
the menu has been used before, the last
accessed page appears.
4
If the CONTENTS page is displayed,
turn the MENU knob to move b to
"SHT ENABLE", then press the MENU
knob to display the SHT ENABLE
page.
If a different page is displayed, turn the
MENU knob until the SHT ENABLE page
appears, then press the MENU knob to select
the page.
022 SHT ENABLE
SHUTTER SLS
SHUTTER ECS
SHUTTER 1/100
SHUTTER 1/125
SHUTTER 1/250
SHUTTER 1/500
SHUTTER 1/1000
SHUTTER 1/2000
5
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
56 Setting the Electronic Shutter
MENU ON/OFF switch
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: ON
b on the left of the selected item changes to
z and z on the left of the setting changes to
?.
6
Turn the MENU knob until "ON"
appears, then press the MENU knob.
z on the left of the selected item changes to
b and ? on the left of the setting changes to
z.
To set another mode or speed, return to step
5.
Note that only the shutter speeds set to "ON"
can be selected with the SHUTTER selector.
7
To end the menu operation, set the
MENU ON/OFF switch to OFF or close
the cover of the menu operating section.
The menu disappears from the screen and the
display indicating the current status of the
camcorder appears along the top and bottom
of the screen.