Information And Controls In Thumbnail Screens - Sony PDW-700 Operation Manual

Information and controls in
thumbnail screens
Clip thumbnail screen
1 2
Clip:C0006
TC 00:23:00:25 TC 00:23:40:07
TC 00:25:49:23 TC 00:26:22:10
TC 00:28:06:09 TC 00:28:22:02
30 NOV 2005 13:38
DATE&TIME
5
a Clip name
Displays the name of the selected clip. When the
clip has a title, it is displayed as "TITLE00001"
(see page 76). Clip names can be displayed in
Japanese when the area of use (see page 37) is set
to "NTSC (J) AREA".
Note
To display the clip title, Settings >Display Title in the
Disc Menu needs to be set to On.
b Selection frame
Indicates that the thumbnail is selected. To select
another thumbnail, move the frame (see page 87).
Multiple selection frames appear when multiple
thumbnails are selected (see page 86).
c Clip number/total number of clips
Displays the total number of clips on the disc, and
the number of the selected clip.
d Scrollbar
When not all of the thumbnails can be displayed
in the thumbnail display area, the position of the
slider shows the relative position of the currently
displayed clips, and the length of the slider shows
the relative length of currently displayed clips
within all of the clips.
When you have a large number of thumbnails,
you can save time by using the Skip Scroll
function to jump directly to the thumbnail you
want (see page 87).
82 Overview
1
3 4
006/040
TC 00:24:45:11 TC 00:25:06:14
TC 00:27:19:04 TC 00:27:51:09
TC 00:23:34:18 TC 00:23:54:22
0:00:10:23
DUR
6
e Clip date and time
Displays the date and time when the selected clip
was shot and recorded.
f Duration
Displays the duration (recording time) of the
selected clip.
1Thumbnail display items
1 2
TC 00:26:22:10
4
a Index picture
Displays an image to stand for the content of the
clip. The index picture is normally the first frame
of the clip.
b Index picture changed mark
This mark, like the folded-over corner of a page
that you want to remember, appears when the
index picture has been changed to any frame other
than the first frame of a clip (see page 90).
Note
When you cue up a clip, the unit always cues up the first
frame, even when the index picture has been changed to
a different frame.
c S mark
This mark appears when shot marks or multiple
Rec Start essence marks have been set in the clip
(see page 73).
The chapter thumbnail screen can be displayed
for clips that show this mark (see page 83).
d Clip and frame information
Displays the clip or frame information selected
with the Clip Information item in the Thumbnail
Menu (see page 89). The factory default selection
is the timecode of the first frame or the timecode
of the thumbnail frame.
3
5