Setting The Date/Time Of The Internal Clock - Sony PDW-700 Operation Manual

Setting the Date/Time of
the Internal Clock
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
1
Holding down the MENU knob, move
the MENU ON/OFF switch to ON.
The TOP menu appears.
2
Turn the MENU knob to move b to
DIAGNOSIS and press the MENU
knob.
If this is the first time the DIAGNOSIS menu
has been displayed, the CONTENTS page
appears. If the menu has been used before,
the last accessed page appears.
3
If the CONTENTS page is displayed,
turn the MENU knob to move b to
TIME/DATE and press the MENU
knob to display the TIME/DATE page.
If a different page is displayed, turn the
MENU knob until the TIME/DATE page
appears, then press the MENU knob to select
the page.
The TIME/DATE page appears.
displayed on the left of ADJUST.
02 TIME/DATE
ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
4
Press the MENU knob.
The TIME ADJUST setting window appears.
TIME ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
OK
38

Setting the Date/Time of the Internal Clock

5
6
7
8
To cancel the setting
b
is Before executing step 8, move b to "ESC" at the
top right of the window and press the MENU
knob.
Alternatively, flick the CANCEL/PRST /
: EXEC
ESCAPE switch down to the ESCAPE side.
All settings or changes are discarded and the
: 12
: 55
TIME/DATE page of the DIAGNOSIS menu
: 58
appears.
: 08
: 07
: 31
ESC
: 12
: 55
: 58
: 08
: 07
: 31
• HOUR: Sets the hour value.
• MIN: Sets the minutes value.
• SEC: Sets the seconds value.
• YEAR: Sets the year.
• MONTH: Sets the month.
• DAY: Sets the day.
Turn the MENU knob to move b to the
item you want to set, and press the
MENU knob.
b
on the left of the selected item changes to
z and z on the left of the setting changes to
?.
Turn the MENU knob to display the
desired value, and press the MENU
knob.
b
z changes to and ? changes to z.
To continue the remaining settings,
repeat steps 5 and 6.
When you finish settings, turn the
MENU knob to move b to "OK", then
press the MENU knob.
The internal clock is set with the date and
time set in steps 5 to 7. The TIME/DATE
page of the DIAGNOSIS menu appears
again. The time set on the TIME ADJUST
setting window is displayed.