Konica Minolta 7135 User Manual page 92

Checking Feature Selections and Proof Copying (continued)
Verify the settings made for the current job.
• If settings are OK, proceed to step 8.
• If a sample copy is needed, proceed to the next step.
4.
If any setting change is required before proofcopying, touch EXIT to
return to the Basic Screen, then change settings, as required.
5.
Touch PROOF COPY on the Check Screen.
A sample copy will be output.
If the copy result is satisfactory, proceed to step 7.
If any setting change is required, proceed to the next step.
3-42
DETAILS
• Press [STOP/CLEAR] to suspend the proof copying. In this case, the
scanned image data will not be deleted from memory.
• You can change selections with an asterisk (*) displayed on the left side
after proof copying.
DETAILS
If the desired selection cannot be changed, press [STOP/CLEAR] to
delete all the data in memory, then press [AUTO RESET] to restart the job
setting.