Table of Contents
Advertisement
Positioning Title Pages on the Right Side (Chapter) (continued)
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
6.
Enter the desired print quantity from the control panel keypad.
7.
Position originals FACE UP in the document feeder.
8.
Press [START].
8-10
HINT
See p. 3-7 for details on setting print quantity.
HINTS
• For details on positioning originals, see p. 3-2 to p. 3-4.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
exceeds 50.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.
Advertisement
Chapters
Table of Contents
Troubleshooting
