Konica Minolta 7135 User Manual page 3

Recycled paper is used for the inside pages of this book.
Workgroup Document System™
Auto Low Power
This function conserves energy by lowering the set temperature of the fixing unit. In the standard setting, Auto
Low Power operates automatically when 1 minute has elapsed after completion of the last copy, with the copier
remaining in the ready to copy state during that time.
The time period for the Auto Low Power function can be set for 1 minute, 5 minutes, 10 minutes, 15 minutes, 30
minutes, 60 minutes, 90 minutes, 120 minutes, or 240 minutes. See p. 2-12 for details.
Automatic Shut-Off
This function achieves further energy conservation by partially turning the power supply OFF, thereby reducing
energy consumption to 20W or less. In the standard setting, Automatic Shut-Off follows Auto Low Power,
operating automatically when 1 minute (machine without options) / 15 minutes (machine with options) have
elapsed after completion of the last copy, with the copier remaining in the ready to copy state during that time.
The time period for the Automatic Shut-Off function can be set for 30 minutes, 60 minutes, 90 minutes, 120
minutes or 240 minutes. See p. 2-12 for details.
Automatic Duplex Copying
To reduce paper consumption, use this function to make double-sided (duplex) copies, automatically.
We recommend that you utilize the Auto Low Power function, the Automatic Shut-Off function, and the Automatic
Duplex Copying function.
Konica 7022/7130/7135
E S
NERGY
E
The NERGY
widespread and voluntary use of energy-efficient technologies that reduce
energy consumption and prevent pollution. As an
Konica Corporation, Inc. has determined that this product meets the
S
TAR guidelines for energy efficiency, based on the following features.
TAR® Program
S
TAR Program has been established to encourage the
User's Manual
E S
NERGY TAR Partner,
E
NERGY