Konica Minolta 7135 User Manual page 257

(3) Touch DEL. to delete the input character
from the last.
(4) Touching CANCEL on the Name Input
Screen will clear all the input characters.
(5) To change the existing name, touch DEL. to
delete it and enter the new name.
6 Touch OK on the Name Input Screen to return to
the ECM Data Input Screen.
7 Touch Limit. Limit key will be highlighted,
enabling you to immediately enter copy limit.
8 Enter a 6-digit copy limit for the ID No. using the
keypad on the control panel. The input copy limit
will be displayed on the right of the copy count.
NOTES:
1. If an invalid copy limit is entered, continue by
entering the valid 6-digit copy limit.
2. Entering "000000" signifies no copy limit.
3. The Clear key, though it clears copy count, does
not function on the ECM Data Input Screen.
9 Touch OK to complete the settings and return to
the ECM Setting Menu Screen.
When the same ECM password has been used
for another ID No., the Password Duplication
Screen will be displayed. To re-enter new
password, touch YES and return to the step 5.
To create duplicate password, touch NO, then
touch OK.
NOTE:
It is possible to assign the same ECM password to
different ID Numbers. Note, however, that the
number of copies will be counted only for the ECM
password with the smallest ID No. Copy count for the other ID Numbers will not be
monitored.
We recommend you do not use duplicate ECM password.
10 If other ECM setting changes are required, touch the desired key.
11 Touch RETURN to restore the Key Operator Mode Screen.
12 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
[4] E.C.M. (Electronic Copy Monitor) (continued)
Key Operator
Mode
System Initial
Copier Initial
Preset Key
E.C.M.
Lock Job
Memory
Paper Type
Panel Contrast
Key Operator
Data
Weekly
Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
11
11-21
Key Operator
Mode