Konica Minolta 7135 User Manual page 187

Repeating Automatically or Selecting Repeating Times
4.
Touch to highlight the desired mode key.
Touch 2 Repeat, 4 Repeat, or 8 Repeat to select the desired Repeat mode.
Touch OK to return to the Repeat Mode Selection Screen.
5.
Touch OK.
The Application Selection Screen will be restored.
Non-Image Area Erase is automatically selected on the Application
Selection Screen when AUTO mode is selected.
6.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
7.
Select the desired magnification and copy size.
• APS and AMS are automatically released, and 1.00 (100%) is selected
• When 2 Repeat, 4 Repeat, or 8 Repeat is selected, the scanning area
• Copy mode is automatically set to 1a1. When selecting 1a2 mode,
8.
Enter the desired print quantity from the control panel keypad.
See p. 3-7 for details on setting print quantity.
(Repeat: AUTO/ Repeat Mode) (continued)
DETAILS
DETAILS
as a magnification ratio.
will be a portion of the selected paper size equally divided according to
the selected mode.
In this case, magnification ratio will be fixed to 1.00 (100%).
Platen store mode will function automatically.
HINT
Application
Selection Screen
Sheet/Cover
Insertion
Chapter
Combination
Booklet
Transparency
Image Insert
Book Copy
Mixed
Original
Folded
Original
Non-Standard
Size
Upside Down
Text/Photo
Enhance
Reverse
Image
Repeat
8
Applications
Frame/Fold
Erasure
AUTO
Layout
Image Shift
Reduce &
Shift
Non-Image
Area Erase
Stamp
8-49
Overlay