Table of Contents
Advertisement
Output Mode for Machine with Finisher (continued)
>>>Specification for Output Modes with Finisher<<<
❒ Incompatible with Sort mode: Using platen glass (unless Image Insert, Book Copy,
or Platen store mode is used), Transparency, Repeat, AUTO Layout, Non-Image
Area Erase
❒ Incompatible with Staple mode: Using platen glass (unless Image Insert, Book
Copy, or Platen store mode is used), Booklet, Transparency, Special Original
(Mixed Original with APS), Repeat, AUTO Layout, Non-Image Area Erase
Using excessively curled paper or some types of thin paper in Staple mode
may cause poor results in arrangement of the stapled sets.
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet,
Transparency, Image Insert, Repeat, AUTO Layout, Non-Image Area Erase, Stamp
(Numbering)
1.
Close the RADF securely, then press [AUTO RESET].
The Sort mode using tray 1 is initially selected.
Key Operator can change the initial output mode. See p. 11-12.
2.
Press [OUTPUT] on the control panel.
The Output Mode popup menu will be displayed.
3.
Select the desired output mode.
Touch to highlight the desired output mode key in the OUTPUT mode area.
To select Non-sort mode, deselect all the keys.
Reminder!
HINT
DATA
HELP
CHECK
APPLICATION
OUTPUT
AUTO RESET
SCANNER / PRINTER
FAX
1
2
3
INTERRU
4
5
6
7
8
9
0
STAR
CLEAR QTY.
3
C opying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode
3-35
Advertisement
Chapters
Table of Contents
Troubleshooting
