Table of Contents
Advertisement
Erasing Outside of the Original (Non-Image Area Erase) (continued)
2.
Touch Non-image Area Erase on the Application Selection Screen.
The incompatible function keys will be dimmed to show inactivity.
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
4.
Select magnification and copy size, as desired.
5.
Enter the desired print quantity from the control panel keypad.
6.
Position original FACE DOWN on the platen glass.
7.
Press [START].
8-64
DETAILS
• APS and AMS are automatically released.
• Copy mode is automatically set to 1a1. When selecting 1a2 mode,
Platen store mode will function automatically.
HINT
See p. 3-7 for details on setting print quantity.
Reminder!
DO NOT CLOSE THE DOCUMENT FEEDER.
Original size should be larger than 10mm x 10mm.
Advertisement
Chapters
Table of Contents
Troubleshooting
