Konica Minolta Printer/Fax/Scanner/Copier 250 User Manual page 41

2
7
Specify each network setting, and then touch [Enter].
Network Setting
Basic
Settings
Machine Name
POP3 Settings
Scanner Settings
Frame Type Set
8
To apply the settings specified on a screen that is displayed by touch-
ing a button marked with
– When turning the machine off, then on again with the main power
switch, wait about 10 seconds to turn the machine on after turning
it off.
The machine may not operate correctly if it is turned on immediately
after being turned off.
Turn the power off and then
on to use new setting.
9
Touch [Enter] until the first screen appears.
2-8
Enter
DNS Settings
SMTP Settings
Priority Compress
Level
LDAP Setting
IP Filtering
Memory
100%
Free
, turn the machine off, then on again.
Cancel
Memory
100%
Free
Setup
200/250/350