9
9.2
Registering transmission source names
When sending Internet faxes, the text of the transmission source entered can
be printed. You can register the transmission source name.
The transmission source name can be used with the following operations.
Item
Internet fax
Note
Up to 8 transmission source names can be registered. Since multiple
transmission sources can be registered, the names for each destination
and track can be used separately.
Transmission source names of up to 40 characters can be registered.
To register a transmission source name
1
Enter Administrator mode, and then touch [Admin. 1].
2
Touch [Initial Setting].
Utility/Counter
Administrator Management 1
Initial
Setting
Account/
User Auth.
TX Settings
Print Lists
9-4
Description
Prints the name of the transmission source at the top of the
page.
Enter
Admin.Set
RX Settings
Report
Document
Settings
Management
Memory
Free
Specifying management settings
100%
200/250/350