Xerox WorkCentre XK50cx Service Manual page 30

Hide thumbs Also See for WorkCentre XK50cx:

Table of Contents

Circuit

EXTERNAL DMA

It brings data from an external device (DUOIP:U16) using DMA channel 0. DMA REQUEST (U15 - 137 or U16 -

4) sent from an DUOIP2(U16) to KS32C6400 activates DMA ACKNOWLEDGE (U15 - 138 or

U16 - 3) signal and drives DMA channel 0 to produce CHIP SELECT and READ STROBE (/RD) at the external

device and bring data from it. It generates address of destination memory, CHIP SELECT and WRITE

STROBE (/WR) in order to move this data into destination memory, and then stores the data.

Fig.4-1-2 EXTERNAL DMA TIMING DIAGRAM

4-3

Table of Contents

Chapters

Table of Contents