Scanning The Document In Separate Batches ("Separate Scan" Setting) - Konica Minolta bizhub C550 User Manual

2
– For transparent or translucent documents, place a blank
sheet of paper of the same size as the document over the
document.
– For bound documents spread over two facing pages, such
as a book or magazine, position the top of the document
toward the back of this machine and align the document
with the
scales, as shown.
4
Close the ADF.

Scanning the document in separate batches ("Separate Scan" setting)

A large document can be divided and scanned in a number of batches.
A maximum of 100 document pages can be loaded into the ADF at one time. However, by specifying with
the "Separate Scan" setting, a document that exceeds 100 pages can be scanned and treated as a single
copy job. In addition, the scanning location can be switched between the original glass and the ADF during
the scanning operation.
0 The loading capacity of the ADF is 100 sheets of plain paper (80 g/m
(210 g/m
0 The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Batch Print" is selected.
2-32
mark in the back-left corner of the document
2
).
Copy Operations
Blank sheet
of paper
2
) or 38 sheets of thick paper
bizhub C650/C550/C451 (FE3)