Scanning During Warm-Up - Konica Minolta bizhub C550 User Manual

Copy Operations
Note
A job can also be queued while the machine is warming up after the sub power switch is turned on. For
details, refer to "Scanning during warm-up" on page 2-9.
After the machine has finished warming up, the scanned image will be printed.
The machine takes about 30 seconds to warm up at normal room temperature (23 °C) when the sub
power switch is turned on after the main power switch is turned on.

Scanning during warm-up

1
Press the sub power switch.
– For details on turning on the machine, refer to "Turning off the machine" on page 2-10.
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] key
lights up in blue.
2
Check that the message "Warming up. Ready to scan." appears on the touch panel.
3
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 2-30.
4
Specify any other desired copy settings.
5
Using the keypad, specify the desired number of copies.
6
Press the [Start] key.
– If the "Copy Operating Screen" parameter in the Utility mode was set to "Yes", touch [Next Copy
Job] to display the Basic screen.
– After the machine has finished warming up, the jobs will automatically be printed.
The document is scanned, and the job is added to the list of queued jobs.
How can the job being printed be stopped?
?
% Press the [Stop] key.
!
Detail
While the machine is warming up to begin printing after it is turned on using the sub power switch, copy
settings can be specified and a document can be scanned to reserve a copy job. After the machine has
finished warming up, the copies are automatically printed.
The print order can be changed or jobs can be deleted from the Detail screen of a job from the Current
Jobs list in the Job List screen.
bizhub C650/C550/C451 (FE3)
2
2-9