Selecting The Output Method - Konica Minolta bizhub C550 User Manual

3

Selecting the output method

Not only can you print directly, but you can select "Secure Print", which requires a password to print, or "Save
in User Box", which saves data in the boxes that were created on the HDD.
1
Click the Basic tab.
2
From the "Output Method" drop-down list, select the output method.
– Print: Prints immediately.
– Secure Print: Saves the document to be printed in "Secure Print User Box" of this machine. When
printing, you are required to enter the ID and password in this machine's control panel. Select when
printing highly confidential documents.
– Save in User Box: Saves the document to be printed in a box on this machine.
– Save in User Box and Print: Saves the document in a box and prints at the same time.
– Proof Print: After a part of the document has been printed, this machine stops printing temporarily.
Select to avoid misprinting a large volume of print jobs.
– ID & Print: Saves the document to be printed in the ID & Print User Box on this machine. When
printing, user authentication must be performed via the control panel of this machine
Secure Print
If "Secure Print" was selected, enter the ID and password in the dialog box that appeared.
Note
The ID and password that are required for "Secure Print" can be preregistered by clicking the [User
Settings] button under "Output Method". If the ID and password are already registered, the dialog box
to enter the ID and password does not appear when "Secure Print" is selected.
To print, specify "Secure Print Document Box" from the Box mode in this machine's control panel, and
then enter the ID and password.
When password rules are enabled on this machine, the passwords that can be used for secured printing
are limited and the jobs are deleted when a password that does not comply with the password rule is
entered.
3-10
Print Operations
bizhub C650/C550/C451 (FE3)