Samsung NX-828 Technical Manual page 92

NX-828
HYBRID KEY SYSTEM
MMC 17
Description:
Used to program the personal dial locations assigned to a station. Each station
may have up to 20 locations numbered 00-19. Each dial number consists of a
trunk or trunk group access code followed by a separator and up to 30 digits to
be dialled. If you dial a valid trunk or trunk group access number, it will
automatically insert the separator (:).
Action
1. Press AUTO RDL and dial 17
2. Using LINE1 or LINE2, select the station you want
(e.g. 202)
3. Press RDL or CONF to select the entry.
OR
Dial the entry number(e.g.17)
If the data is longer than 13 digits, press
ALM/SD to verify the data.
Display shows the entry moving left one digit
4. Enter station Number or telephone number or trunk
access code(e.g.9) followed by the number to be
dialed(e.g. 1234567)
OR
Press HOLD to clear an entry
If you want to make a digit invisible, press MUTE
then digit then MUTE again (e.g. 9 + 123[MUTE]4
[MUTE]567). The digit (4 in this example) will be
displayed ' ¢Ë '.
5. Press AUTO RDL to save and exit
DEFAULT DATA
NONE
RELATED MMC
NONE
STATION SPEED DIAL
PROGRAMMING
Display
201: STN SPD:
202: STN SPD:
17:9:4602831
17:9:1234567
1 7 :9 :1 2 3 ¢Ë 5 6 7