Samsung NX-828 Technical Manual page 64

NX-828
HYBRID KEY SYSTEM
Programmable Keys
NX keysets have programmable soft keys. Each soft key can be programmed for over 36
different uses to personalise each phone. Examples of soft keys include: individual outside line,
individual station line, group of lines, group of stations and one-touch dialling. Using these soft
keys eliminates dialling access codes. The following soft keys have extenders that identify what
station, group or number that feature key applies to: speed dial, page, directed pickup, group
pickup, door phone and vacant messages.
See: MMC 72 Station Key Programming
Pullout Directory Tray
A pullout directory tray is conveniently located beneath all keysets. Use this to record station
directory names and speed dial numbers.
Pulse To Tone Switchover
When dialling a number on a dial pulse network, a station user can dial # and the system will
begin to send DTMF.
Redial
There are three types of external redial available to all station users, as described below.
Automatic Redial
When a user dials an outside number and receives a busy signal, the automatic redial feature is
used to reserve the outside line and automatically redial the number for a programmable number
of attempts.
See: MMC 50 System Timers
MMC 52 System-Wide Counters
MMC 72 Station Key Programming
Last Number Redial
The most recent number dialled on a C.O. line is saved and may be redialled by pressing the
REDIAL button or dialling the LNR ID.
See: MMC 72 Station Key Programming
Saved Number Redial
Any number dialled on a C.O. line may be saved by pressing the pre-programmed SNR button or
dialling the SNR feature code (17) for redial at a later time. It may be redialled by pressing the
SNR button or dialling the SNR ID.
See: MMC 70 Dial Numbering Plan (Default Code for SNR: 17)
MMC 72 Station Key Programming
3 - 21
FEATURES