Samsung NX-828 Technical Manual page 63

FEATURES
NX-828
HYBRID KEY SYSTEM
Key Tone Selection
This feature allows users to hear a slight tone when pressing the keypad on their keyset.
See: MMC 12 Station On/Off (Default for KEY TONE: ON)
Line Queuing With Callback
When the desired outside line is busy, the user can press the CALLBACK key or dial the access
code to place his/her station in a queue. The user will be called back when the line is available
Line Skipping
When a user is talking on an outside line and automatic hold is turned off, the user may directly
press another line key without causing the previous call to go on hold.
Message Waiting Light / Indication
When a message indication is left at a keyset, the MESSAGE button will light red. Single line
telephone users will receive a few seconds of interrupted dial tone to notify them that a message
is waiting. Message waiting indications can be left for any station or group of stations.
Mute Microphone / Handset
On NX keysets, pressing the MUTE key will cut off the microphone or the handset transmitter,
depending on which is in use. NX-6B keyset users cannot use this feature.
Off-Hook Ringing
When a keyset is in use, the system will provide an off-hook ring signal to indicate that another
call is waiting. The ring signal is a single repeated ring. The interval is controlled by a system-
wide timer. Single line stations will receive a tone burst through the handset instead of a ring.
On-Hook Dialling
Any keyset user can originate calls without lifting the handset. When the called party answers,
speak into the microphone or lift the handset for more privacy.
One-Touch Dialling Keys
Frequently-used speed numbers can be assigned to one-touch dialling keys for fast accurate
dialling.
See: MMC 72 Station Key Programming
3 - 20