Samsung NX-828 Technical Manual page 150

NX-828
HYBRID KEY SYSTEM
MMC 80
Description:
Provides a mean of setting parameters for the serial I/O ports (COM1 and COM
2) to work with SMDR and Remote MMC. COM1 and COM2 may be found on
the SMDR/R-MMC card. COM1 is the SMDR port and COM2 is R-MMC port on
the card. COM1 is used as SMDR or TRAFFIC port and COM2 is used for
remote programming.
PARAMETER
TYPE OF SERVICE
REMOTE STN
BAUD RATE
CHARACTER LENGTH
PARITY
STOP BIT
Action
1. Press AUTO RDL and dial 80
2. Press LINE1,LINE2 to select the serial port
(COM1, COM2)
3. Press RDL or CONF to select the parameter
you want
4. Press MUTE/DND or MSG to select the data
5. Press AUTO RDL to save and exit
DEFAULT DATA
COM1 : 9600 8 NONE
COM2 : 9600 8 NONE
COM1 : XON OFF : ON
COM2 : XON OFF : ON
SMDR : COM1
TRAFFIC : COM1
REMOTE : COM2 STN : NONE
NOTE : 'XON OFF' means whether the system checks the CTS pin of the serial port.
'REMOTE STN' means the port displaying the Remote MMC procedure. When remote
programming is in progress, it is not possible to access this port.
RELATED MMC
NONE
OPTIONS
SMDR, REMOTE, TRAFFIC
REMOTE only
300, 600, 1200, 2400, 4800, 9600 BPS
7 BIT, 8 BIT
NO PARITY, EVEN PARITY, ODD PARITY
1 BIT
PROGRAMMING
I/O PARAMETER
Display
COM1:9600 8 NONE
COM1:4800 8 NONE
COM1:4800 7 ODD