Samsung NX-828 Technical Manual page 120

NX-828
HYBRID KEY SYSTEM
MMC 45
Description:
Used to set free trunk selection type and to allow assignment to a specific trunk
group or to several trunk groups. There are eleven (11) trunk groups, 9 and 80-
89, and three modes of selecting free trunk line in the group.
MODE
DISTRIBUTE
HIGH TO LOW
LOW TO HIGH
Action
1. Press AUTO RDL and dial 45
Display shows the free trunk selection mode
2. Press MUTE/DND or MSG to select the free
trunk selection mode
OR
Using KEYPAD, dial
1 for DISTRIBUTE
2 for High to Low
or 3 for Low to High.
(e.g. 2)
3. Using LINE1 or LINE2, to select the trunk group
(e.g. GRP80)
4. Press RDL or CONF to scroll the members of
the group (e.g. 02)
5. Enter a valid trunk number (e.g. 709)
6. Press AUTO RDL to save and exit
DESCRIPTION
Searches the trunk group in circular order. Each time the
group is accessed, the next available trunk in the group is
selected.
Searches the trunk group from last trunk to the first trunk in
the group. If the trunk is busy, the previous available trunk in
the group is selected.
Searches the trunk group. If the first trunk in the group is
busy, the next one is selected
PROGRAMMING
TRUNK GROUP
Dispaly
MODE: DISTRIBUTE
MODE: HIGH TO LOW
GRP80 01:
GRP80 02:
GRP80 02:709