Samsung NX-828 Technical Manual page 115

NX-828
HYBRID KEY SYSTEM
MMC 40
Description:
Used to select the mode of the C.O. line. If PBX mode is chosen, the PBX
access code can be recognised, allowing more complete toll restriction. This
mode is assigned on a per-trunk basis.
Action
1. Press AUTO RDL and dial 40
2. Using LINE1 or LINE2, select the trunk number
you want(e.g. 702)
If you want select all trunk lines, press LINE1
3. Press MUTE/DND or MSG to set the trunk
C.O. or PBX line
OR
Using KEYPAD, dial
1 for C.O line
or 2 for PBX line(e.g. PBX line)
4. Press AUTO RDL to save and exit
DEFAULT DATA
C.O LINE
RELATED MMC
NONE
PROGRAMMING
C.O. PBX LINE
Display
701: C.O
702: C.O
702: PBX