Samsung NX-828 Technical Manual page 52

FEATURES
NX-828
HYBRID KEY SYSTEM
See: MMC 31 Ext/Trk Use
Individual Line Control
Each station in the system can be individually programmed to allow or deny dialling out as well as
allow or deny answering for each outside line.
See: MMC 31 Ext/Trk Use
Live System Programming
The system can be programmed from any display keyset without interrupting normal system
operation. There are three levels of programming: technician and customer access are controlled
by different security passcode.
See: MMC 20 Open Programming
MMC 21 Change Passcode
Technician Level
Technician level has access to all programs and can allow the customer access to system
programs as needed.
Customer Level
This level requires customer passcodes. It provides access to station programs and system
programs allowed by the technician in MMC 90. The system allows the customer to have access
to certain MMCs. The MMC ranges which customers can access can be changed by
programming.
See: MMC 90 Customer Use MMC
Station Level
All keysets can access station programs 10-17 without using a passcode. Each user can only
change data for his/her own keyset.
Meet Me Page and Answer
After a user makes an "All page" Call, the user may remain off-hook to allow the paged party to
meet the user for a private conversation.
Examples:
To use MEET ME PAGE: PRESS FLASH (or Hook/Flash) + System code 56
To use MEET ME ANSWER: Press system code 56
Message Waiting Indication
When calling a station and receiving a busy signal or no answer condition, the caller can leave
an indication that a message is waiting. The MESSAGE button will turn on red at the called
keyset. A single line phone will receive a distinctive message waiting dial tone. Five message
3 - 9