Samsung NX-828 Technical Manual page 171

NX-828H
HYBRID KEY SYSTEM
3.2 Recording
1. Dial 18 to display 'RECORD:PLAY ?' in LCD.
2. Select phrase number (1-4) you want to record, and display 'RECORDING' in LCD.
3. Start to record through handset or speaker phone.
4. After recording, you can automatically hear the recorded message.
NOTE: When you first switch on, you should record from phrase 1 to phrase 4 in order.
3.3 Monitoring
1. Dial 18 to display 'RECORD:PLAY ?' in LCD.
2. Select phrase number (5-8) you want to monitor, and display 'PLAYING' in LCD.
You can hear the selected message.
NOTE:
1. In order to change a recorded message, record a new message following procedure (1), so the
message will be updated.
2. If you carry out monitoring procedure when no message is recorded, you might hear error tone.
3. You cannot record a message while a message is being played back.
4. If you stop recording prematurely, you can neither record a new message nor monitor a
recorded message until the predetermined record time elapses.
5. The above procedures specify 18 to be dialled for recording. It is possible that this number
might have been changed
A-10
DISA VOICE ANNOUNCEMENT