Information Display Operation - Raymarine Remote display Owner's Manual

Remote Display
2.3

Information Display Operation

Information is displayed in a "Chapter and Page" format using the
button to scroll through the chapters and the
move between the pages within a chapter. The diagram below shows
the information format.
Pressing the
page last selected in that Chapter will be displayed. Both Chapter and
Page selection will scroll back to the first page once a cycle has been
completed.
Four chapters are available:
Single line displays
Four line displays
Rolling Road display
relation to the direct track from the previous to the current waypoint and
the direction to steer to return to the direct track.
Graph Displays
To alter the time span of a graph:
Press the
"CHANGE TIME" appears at the top of the page. Use the
buttons to change the time span. Press
selection.
6
button at any time moves to the next Chapter and the
Eight pages, each displaying a single item of data. The data
item to be displayed on each page can be selected in setup
from the full list of data pages described in section 2.8.
See setup on page 25 S28.
Four pages, each displaying four data items. The data items
to be displayed on each page can be selected in setup from
the full list of data pages described in section 2.8.
See setup on page 26 S29
A single page displaying the following navigation data:
current waypoint name, distance to waypoint, course over
the ground (COG), speed over the ground (SOG), bearing to
waypoint, cross track error and turn angle.
A rolling road diagram illustrates the vessels course in
Two pages, each displaying a plot of a user selected data
item against time. See setup on page 26 S30.
For the wind direction graph, LFT and HDR labels indicate
the lift and header trend segments of the graph.
button while the graph is displayed. The message
and buttons to
and
again to confirm the
www.raymarine.com