Raymarine Remote display Owner's Manual page 21

An ON/OFF toggle (for example the Cross Track Error alarm can be
either ON or OFF).
To edit a numeric parameter value:
Press the
Use the
Press the
To reset a memory value:
Press the
To select a parameter option from a list:
Press the
Use the
Press the
To toggle between ON/OFF parameter settings:
Press the
www.raymarine.com
button. The value data will begin to flash.
and buttons to adjust the value.
button again to set the new value.
button. The parameter is reset.
button. The parameter option will begin to flash.
and buttons to select the option required.
button again to set the new option.
button. The setting will toggle between ON and OFF.
Setup and Calibration
19