Raymarine Remote display Owner's Manual page 25

S13 Temperature
4.2 Sensors Chapter
Speed Page
S14 Speed Response
S15 Speed Offset (%)
S16 Speed Display Format
S17 Sea Temperature Calibration
Depth Page
S18 Keel / Waterline Offset
www.raymarine.com
Sets the units in which water temperature information is
displayed.
The options available are: o C (Degrees Celsius) or o F
(Degrees Fahrenheit).
Sets the update period of the Speed display.
The options are: Auto/Slow/Medium/Fast
The boat speed calibration factor adds a percentage factor
which corrects the information from the paddlewheel and
ensures the boat speed is displayed correctly.
See page 32 for the calibration procedure.
Sets the number of decimal places to which the boat speed
information is displayed.
The options are 0.1 or 0.01.
The sea temperature calibration factor adds a value which
corrects the information from the temperature sensor and
ensures the water temperature is displayed correctly.
Allows a keel offset to be added allowing the display depth
reading to indicate depth below the bottom of the boat, or a
waterline offset allowing the depth reading to indicate actual
water depth. See page 31 to set a depth offset.
Setup and Calibration
23