Display Controls; Switching On And Off At The Breaker - Raymarine LIGHTHOUSE SPORT 3.18 Operation Instructions Manual

4.1 Display controls

The buttons available on Element™ displays and their function are detailed
below.
1. [Waypoint]
• Press to place a waypoint at your vessel's position (unless cursor mode
is active in the Chart or Fishfinder app).
• Press to place a waypoint at the cursor's position in the Chart and
Fishfinder apps (when in cursor mode).
2. [Home]
• Press to display the Homescreen.
3. [Menu]
• Press to open Homescreen menus and app menus.
• Press and hold for approximately 2 seconds to switch which app has
focus in a multi app page.
• Press to close Homescreen menus and app menus.
4. [Directional pad] (8–axis directional controls)
• Use to navigate Homescreen and menus.
• Press any direction to activate cursor mode in the Chart and Fishfinder
apps.
• Use to position the cursor in the Chart and Fishfinder apps.
22
5. [Back]
• Return to previous menu or dialog.
6. [OK] — Confirms menu selections, opens context menus
• Press to confirm a currently highlighted option.
• Press to open context sensitive menus in the Chart and Fishfinder apps.
7. [Minus] (Zoom / Range out)
• Press to increase the area displayed onscreen in the Chart app.
• Press to decrease the zoom level in the Fishfinder app, when in Zoom
mode.
• Press to revert to scrolling mode from lowest zoom level in the
Fishfinder app.
8. [Plus] (Zoom / Range in)
• Press to decrease the area displayed onscreen in the Chart app.
• Press once to initiate Zoom mode in the Fishfinder app, subsequent
presses will increase the zoom level.
9. [Quicklaunch 1] / [Quicklaunch 2] / [Quicklaunch 3]
• Press to open the assigned app page.
• Press and hold to assign the quick launch button to the app page
currently highlighted on the Homescreen.
10. [Power]
• Power on — Press and hold until the display beeps (approximately
2 seconds).
• Shortcuts menu — Press once to open the shortcuts menu.
• Power off — Press and hold until the display turns off (approximately
5 seconds).
• Power off — Press to open the Shortcuts menu and then select [Power
down display].

Switching on and off at the breaker

When powered off the display will still consume a small amount of power.
If you wish to ensure that the display is not consuming any power then it must
be switched off at the breaker or have the power cable unplugged.