Raymarine Remote display Owner's Manual page 30

Remote Display
To alter the position of a display in the list of controllable displays:
Press the
the display in the list of controllable displays is shown by the
Press the
Press the
beside the display.
Press the
below the selected display are pushed down the list.
S33 Reset List
Options Chapter
S34 Auto Networking
S35 Pocket Mode
S36 Key Lock
S37 Time
S38 Light
28
button to scroll down the list. The sequence number of
button, the selected display entry will flash.
button until the required sequence number appears
button to confirm the new sequence number. All displays
Returns the list of controllable displays to its default settings.
Adds display units or transducers to the Micronet network.
This function is only available on the display which was used
to power up the system. Refer to the "Auto Network" sheet for
further information.
Sets the time out value for Pocket Mode, the options are OFF,
15, 30, 60 or 120 seconds.
Enables the key locking feature.
See Page 9 for the key locking process.
The number of hours added or subtracted from UTC (GMT)
to allow the display to show local time.
Configures the display to control the system backlighting or
just its own backlighting.
The options are: Network/Local.
cursor.
www.raymarine.com